Foam Applicator Gun
What is a Foam Application Gun?
A Foam Application gun is a great tool when applying expanding foam, and helps to apply expanding foams in a precise and in a efficient way, preventing excessive wastage of foam.
Foam Gun Applicator Components
Foam Regulator
The foam regulator is also known as a metal trigger control valve. It is located at the back of the foam application gun and looks like a small wheel. To make a bigger gap you need to open the regulator by turning it anti clockwise. To make a smaller gap you need to close the regulator by turning the regulator clockwise.
Metal cannister connector.
The metal cannister connector is located at the top of the foam gun applicator, it looks like a big wheel. All you need to do is turn the foam cannister clockwise. The function of the metal cannister connector is to makes sure there is an air tight seal between the gun and a can of expanding foam.
Metal tip and barrel
The metal tip barrier is a long metal tube located at the front of the foam applicator gun. The metal tip barrier function is to allow the expanding foam to flow. The metal tip and barrel is also very easy to clean as the accessories are detachable. The foam gun applicator includes a plastic extension long tube and a small nozzle. The extension tube is ideal to cover a larger area that has to be sealed. The nozzle is perfect for smaller areas to be covered or smaller areas that need extra precision. Another great feature of the foam applicator nozzle is that it can be cut to size to give you an extra precise clean finish when applying expanding foam.
Metal trigger
The metal trigger is located on the front of the handle and is made from metal. The trigger is easy to use all you need to do is push in towards the handle. The metal trigger allows the expanding foam to flow through the metal tip and barrel.
Comments