WindowParts Ltd.

Intumescent Fire Resistant Letter Plate - 30 Minute Fire Rating 12inch - 20/20 and 40/40  With quick fit installation, this Fire Resistant Letter Plate has intumescent material that swells to seal the letter opening in the event of a fire, stopping the spread of the fire and the smoke and gases it can produce. This letter plate is therefore an excellent choice to provide a fire-resistant door with a letterbox, keeping the door safe as well as functional. This Fire Resistant Letter Plate offers 30 minutes worth of fire protection, and is also fully draught sealed. Letter plate length 310mm. Letter plate width 76mm. Can be used in either horizontal or vertical orientation. 30 minutes fire protection (FD30). Available in a range of different colours. (Chrome, Gold, Silver & White) Letter plate flap opens to 180 degrees. Fullly weathersealed to provide no draught. Spring loaded mechanism.  Fire Resistant Strip available separately, see HERE , Achieved a Warrington Fire

Trickle Vents For uPVC, Aluminium & Timber Frames WindowParts Trickle Vents Comply With All Building Regulations WindowParts Tan On White 4000mm Trickle Vent The WindowParts Trickle Vents come in a large range of colours, including pairs with different colour sets to suit windows with different coloured inner & outer profiles. Standard White Brilliant White Black Brown Caramel Tan Black & Brilliant White Brown & Standard White Tan & Standard White Tan & Brilliant White These trickle vents comply with all current building regulations in the UK for both new builds & renovations. Trickle vents cut down on condensation on inner panes and allow airflow, they can be opened & closed with a simple flick of a lever. WindowParts Brown 3000mm Trickle Vent Supplied as an inner & outer pair with fixing screws, these trickle vents have a flyscreen filter built in. Click HERE for 4000mm Trickle Vents Click HERE for 3000mm Tric

Winbag Inflatable Wedge   Using the WINBAG inflatable wedge window and door fitting can be done quickly and easily by one man doing the job alone.   5 Simple steps to installing a window frame with the Winbag Wedge. Step 1: Place two blocks at the correct level under the window frame and a Winbag on the top of the frame and use the built in pump to inflate the Winbag, the window now is held with the Winbag at the top and resting on two blocks in the bottom. The window should now be just as tight as it can still be adjusted. Step 2: The window frame can now be adjusted, first at the top and then the bottom to ensure correct placement in proportion to the facade. Inflate and deflate the Winbag as needed to keep the frame secure while adjusting. Step 3: Using a winbag on each of the side corners and a level you can add or remove air from each of the bags until it is perfectly lined up. Step 4: Affix as normal, the winbags are strong enough to keep your frame sec

The WP Flexi Handle - Making Your Life Easier Only One Replacement Handle Needed For 95% Of Jobs Sprung Handle. At 240/260mm Long They Cover Any Existing Holes. Will Fit Single/Split/Twin Spindle Multipoint Locks. Optional 7-8mm Spindle Conversion Kit. Ideal For Maintenance Work, Only One Handle Needed For "Van Stock". Fits Hundreds Of OEM Locks & Doors. Available In White, Gold, Silver & Chrome.  Screw Hole Distance : 240mm (Chrome) - 260mm (Silver, Gold, White). PZ distance adjustable from 59mm to 96mm. Visit WindowParts To See Our Great Deals - Click Here